Mould Base Standard : |
LKM Brand, Hasco, DME ect ; XUEJUN customed or As customers'Requirement |
Cavity/Core Material : |
S136, 2316,S316,ect ; XUEJUN customed or As customers'Requirement |
Cavity Qty : |
Multi-cavity(1-144cavity) ; |
Runner : |
Yudo/ Mastip/ HASCO/ DME/Or other hot runner As customers'Requirement |
Gate : |
pnuematic pin-point valve gate OR short tail OR long tail |
cooling system: |
spiral independent cooling system for each single core ,cavity and valve gate. |
Plastic Material for product: |
PET,PC,PP,ASetc; |
Mould Life Time : |
more than 2,000,000shots as per customers' requirement ; |
Lead Time : |
25-45 workdays based on the different products ; |
Package : |
Standard wooden case package or As per customers' requirement ; |
Price Terms : |
FOBNingboPort,China; |
Payment term: |
T/T, L/C at sight; |
1.Mould structure
Advanced structure is designed to improve rate of finished
products;The each cavity is self locked independently with the core.The
off-center adjustment system make the perform thickness error less than0.05mm.Bottleneck is adopted International
Screw thread standard, No cutting of gate to reduce the labor intensity
2. Material of steel
Cavity and core use stainless steel 2316 with fine polishing,high
hardness to get mold's high precision and good quality. mechanical treatment
cavity and core to prolong service life,nitrogen treatment with neck screw.with
fitly operation,guarantee Long using life over 2 million shots of injection
cycle
3.About gate system
Pin-valve gate,pneumatic drive the nozzle pin simultaneous high
speed open and close action. which can effectively control the injection hole
open and close actions on each cavity. reliable seal function, smooth moving,
low thermal expansion rate ,long using life and also saves electric energy.
4.About hot runner
The hot runner system is designed and made by ourselves, it can
achieve ideal and prompt heating effect for preform production ,cavity with
lower injection pressure to reduce wear and tear of mould parts.we use the
double heating system,it has separate temperature control mode ,the heat bar
are used to heat the mould mainfold plate,small heaters supply the heating
temperature for cavity nozzle continuously.
5.Cooling system
Each parts including core ,cavity and valve gate has
independently cooling system.
6.special satisfied servive
Each mould undergoes strict mould test before delivery.we can
provide an experienced team for installation and test as per client's request
Standard inter-changeable mould components
High quality mould from good mould manufacture,we can design
different preform&bottle mould according to customer require.
Contact Us
NO.10 Meihuajin Road, HuangYan, TaiZhou, ZheJiang, China
Tel:+86-576-84115538
Mobile:+86-15257615522
Fax:0086-0576-84115538
Email:xuejun@china-petmould.com